The event attracted over 105,000 visitors. © Innovation in Textiles

ThemedInnovating the World of Textiles, the 18th edition of ITMA, the world’s largest and most established textile and garment technology exhibition, concluded successfully in Barcelona, Spain, last week, hosting 1,717 exhibitors from 45 countries. The event that spanned seven days attracted over 105,000 visitors from 137 countries, chalking up new records for the exhibition, which has been held every four years since 1951.

The show featured many exciting new product launches and innovative technologies and products, including those that leverage the Internet of Things. “The digital transformation of the textiles and garment manufacturing value chain and sustainability concerns of the industry have driven up visitor interests in ITMA 2019. We had a strong turnout, despite trade tensions and poor business sentiments,” commented Fritz P. Mayer, President of CEMATEX, the European Committee of Textile Machinery Manufacturers, and owner of ITMA and ITMA Asia.

The show featured many exciting new product launches. © Innovation in Textiles

“They were also impressed with presence of new visitor segments, such as bigger numbers of fashion and sports brands. Considering that for this ITMA edition, the exhibition duration has been shortened from 8 to 7 days, we still enjoyed good visitorship.” The top five countries where visitors came from were Spain, Italy, India, Turkey and Germany.

Place for innovation

Many new technologies were launched, ranging from 3D weaving and knitting to hi-tech nonwovens processes, sustainable chemicals and state-of-the-art garment-making technologies, and wide range of software-powered automation solutions.

Italian company Santex Rimar Groupintroduced at ITMAitsSperotto Rimar Compas, a new frontier in compacting woven and knitted fabrics made in natural and blended fibres;Solwa Drywagreen sludge dryer for efficient and cost-effective sludge management respecting environment and climate; andSantex Rimar Group Athena– advanced deep learning technologies.

eurolaser. © Innovation in Textiles

German manufacturer of high-end cutters eurolaser premiered the company’s patentedCut’n‘Protect Technologysolution for the laser cutting of wool. During laser cutting, fibres “melt”, which provides the characteristic clean cutting edge. At the same time, laser cutting prevents the cut edge from fraying, so that the material can continue to be processed without the processing step of trimming. The unique benefit of the new technology is the elimination of the characteristic odour when laser cutting wool, and there has been a lot of interest from the company’s customers, according to Marcel Berger, Field Representative, Sales Department, eurolaser.

Cobble, a Vandewiele company based in the UK, introduced anumber of innovations, including its most versatile tufting machine to date, theColortec L+．It combines three advanced Cobble technologies in a single machine – ICN (individually controlled needle), IPD (individual pile delivery) and LCL (level cut/loop). This combination is designed to provide full design freedom for the production of multi-colour jacquard-type cut and loop wall-to-wall carpets, area rugs, and more.

In the area of technical textiles, the Flat Knitting team at Groz-Beckert, a German provider of industrial machine needles, presented a new special application needle that can handle a huge range of uses. The stability of the design reduces downtimes and boosts productivity. It also features special technical characteristics, such as a secure yarn insertion mechanism and reliable latch function – even when performing multi-thread knitting of solid loops using continuous filament yarn.

Knitting for all

The common theme among the knitting machinery manufacturers at ITMA in Barcelona was the integration of the process stages and digitalisation, automatisation, as well as an ever-expanding range of applications for a variety of knitting technologies.

Shima Seiki. © Innovation in Textiles

Proposing knitting as an alternative manufacturing solution for non-fashion related industries, Japanese computerised flat knitting machinery manufacturer Shima Seiki demonstrated that what was impossible to knit in the past can now be knitted with itsKNITification解决方案。“针织为te提供了巨大的潜力chnical textiles with its inherent characteristics: stretch and compression,” said Masaki Karasuno, Head of Corporate Communications at Shima. “Flat knitting provides further potential with its capability to shape fabric on the machine. New knitting techniques such as inlay made possible with special loop pressers featured on our newN.SVR-SPseries machines add further value to knitting and have gained particular attention for its ability to produce hybrid knit-weave fabrics that allow insertion of technical yarns heretofore considered incompatible with knitting, into existing knit fabrics. These include carbon fibre, monofilament and even metallic yarns. Shima has even developed a special Yarn Unwinding Device for unwinding spools of technical yarn to ease yarn feed for such difficult-to-handle material.” Read more here –Shima Seiki sets out to KNITify the World．

Stoll. © Innovation in Textiles

Another global leader in flat knitting machinery Stoll, from Germany, returned to ITMA with afocus on newknitelligencenetworking solution, designed to play a key role industry wide, as each software tool solidifies the entire knitting process from design to production. The manufacturer also explored the topic ofStoll-knitrobotic– automated robotic functions during a knitting process, which will replace manual interventions without interruptions (like inserting non-textile elements as the item is being knitted). Demonstrations were performed on theADF 530-32 ki Wknitting machine in the gauge E18/16. In the sector of technical textiles, Stoll presented various demanding technical applications on theCMS 530 ki Win the gauge E7.2.

Santoni’s XT Machine. © Innovation in Textiles

Santoni, an Italian leader in the production of sock and pantyhose machines and a part of the Lonati group,celebrated its 100-year anniversaryat the show. The company featured a diverse display for manufacturers of underwear, sportswear, beachwear, external, medical wear, denimwear, smart-textiles, socks and footwear, and more. The company presented its brand-new, patentedXT Machinewith its ingenious intarsia technology for efficient production of the shoe uppers, which is expected to hit the market in 2-3 months, according to Patrick Silva Szatkowski, Marketing Manager, Santoni. Also on show was the updated versatileMec-Mortechnology, known throughout the world as the only alternative range of machines that look circular but perform like a V-bed machine. This technology, displayed on 20 gauge, enables the production of weft double-face knitted garments with high quality designs and record production times. It is also used to produce accessories, such as 3D backpacks, where various yarns can be knitted into ad-hoc positioned areas, in order to obtain a seamless structure for superior product performance.

Mayer & Cie. © Innovation in Textiles

Also with a focus on digitalisation and versatility, German warp knitting machinery builder Mayer & Cie. put its digital offerings together under the nameknitlink．The platform includes a web shop, remote maintenance options and recording and evaluation of machine data for the customer and is to be further expanded in the future. The company also premiered theOVJA 1.1 EETTpremium jacquard machine, part of the focus on sports, and theWeftnit 3.2machine study. Unlike common knitting machines, the Weftknit works with spring beard needles and the applications could be found in the automotive, swimwear, sports and leisurewear and outerwear sectors, as well as producing substrates for laminated fabrics.

“In view of the current situation of the textile machinery market the 2019 ITMA was, by and large, satisfactory,” said Benjamin Mayer, one of Mayer & Cie.’s two managing partners and the director in charge of sales. “Very positive trade fair experiences included the response to our digital offerings and the feedback about our Weftnit machine study. We were evidently already able to demonstrate at the development stage the advantages of the knitting method convincingly.”

Weaving novelties

Picanol, a Belgian high-tech weaving machines producer, exhibited 12 machines at the show, including the company’s brand-new airjet machineOmniPlus-i, which premiered at ITMA. It features a redesigned reed motion, optimised relay nozzle set up and can be combined withSmartShed, the fully electronically controlled shedding motion. “At Picanol, we believe that in this fast-changing world of weaving, the needs of weaving mills in general and the expectations of our customers and their operators are evolving rapidly,” said Frederic Dryhoel, Spokesperson & Corporate Communication Manager, Picanol Group. With the new machine, the company says it wanted to demonstrate that a machine can be performant, versatile, sustainable, digital and user-friendly at the same time.

Picanol. © Innovation in Textiles

Another weaving technology specialist Itema, from Italy, presented twonew market launches, a never-before-seen weaving insertion concept and a series of weaving novelties. The new Itema airjetA9500-2bedsheetinghas been developed to provide the most demanding bed sheeting weavers with an airjet weaving machine capable to reach the highest performances. Key machine components, such as main and tandem nozzles, have been redesigned along with the whole pneumatic platform. The second airjet weaving machineA9500-2is the second generation of the Itema airjet A9500 and A9500p. Thanks to a new and optimised pneumatic platform, the weft insertion cycle is improved, leading to a quicker system response.

Itema. © Innovation in Textiles

The company also recently launched Itematech – the new division dedicated to technical textiles born as a result of the agreement signed with PTMT, with a product portfolio, which ranges from negative and positive rapier, to air-jet and projectile weaving machines.

Dyeing, finishing and printing

German specialist Monforts presented an energy-optimised new version of its industry-leadingMontexstenter for the first time at ITMA. With the introduction of the newMonforCleanexhaust air treatment system and other unique process innovations, Monforts says it has been able to further reduce the energy consumption of Montex stenters by a further 13%. Exhaust air treatment on stenter frames has posed particular challenges over the years. In addressing this issue, Monforts is now incorporating the MonforClean module into the stenter frame, so there is no additional space requirement. The waste heat from the drying process is used to pre-heat the drying air, resulting in a radical reduction in the conventional heat supply required compared to gas and thermal oil heating. The further integration of an automatic exhaust air filter washing system automatically cleans the module elements.

Monforts Eco Applicator. © Innovation in Textiles

Imogo, a new Swedish company, introduced its newDye-Maxspray dyeing technology. While still at the prototype stage, the Dye-Max promises to slash the use of fresh water, wastewater, energy and chemicals by as much as 90%, compared to conventional jet dyeing systems. Its application unit consists of a closed chamber containing a series of spray cassettes with precision nozzles for accurate and consistent coverage, in combination with the patented imogo pro-speed valve that controls the volume to be applied.

Huntsman Textile Effects launched the high-performance digital ink ranges at the show.NovacronAdvanceink is the next generation of reactive inks for cellulosics with outstanding shade depth and colour gamut, developed for the latest industrial digital printing machines.EriofastVista油墨使打印机实现卓越的持久designs on polyester/cotton blends. Using inks from this range enables printers to adopt a simple urea-free process with significantly reduced energy consumption, washing, machine maintenance and carbon dioxide emissions.

Mimaki. © Innovation in Textiles

Datacolor, a US leader in colour management technology, has collaborated with Adobe to launch a set of innovative tools at ITMA. The collaboration pairs Datacolor’s professional colour lookup toolColorReaderPROwith Adobe’s newest plugin for Adobe Photoshop:Adobe Textile Designer．The integration of software allows designers to measure colour inspiration in the real world and transfer the data to Photoshop automatically via Bluetooth connection. “Adobe Textile Designer was conceived to help streamline the print design process,” said Mike Scrutton, Director of Print Technology and Strategy for Adobe’s Print & Publishing Business Unit. “We are excited to incorporate the ColorReaderPro into the solution to simplify the process of capturing inspiration colour for designers.”

Mimaki, a Japanese manufacturer of industrial wide-format inkjet printers, showed for the first time its brand-new hybrid digital textile printer, uniquely featuring both direct-to-textile and direct-to-transfer print capabilities. These features enable textile and garment manufacturers to achieve flexibility and enhanced application opportunities. The new printer also allows multiple sets of inks to be loaded simultaneously, supporting increased fabric range versatility and maximum product variety.

Sustainable denim story

今年的ITMA呈现强劲的可持续的德nim, with a number of companies from different sectors demonstrating their approach to environmentally friendly denim production processes. Headquartered in Switzerland, Archroma, a leader in colour and specialty chemicals, has launched its newDiresul Smartdenim蓝色, a liquid sulphur blue dye designed to mimic indigo. The new dye has a greener shade, better fastness to minimise back staining, and allows to create overall wash-downs much closer to actual indigo than any other dyestuff, whilst avoiding greyish cast especially in bleaching with hypochlorite, the company explains.

Among itsCadiramodules, part of the company’s Resource Efficiency programme, DyStar, headquartered in Singapore, presentedCadira Denim, a dyeing technique for Indigo to reduce or eliminate the salt freight in wastewater streams, andCadira Laundry．The company developed a range of auxiliaries for ultra-low liquor ratio machines using air for the processing of denim garments. With this technology, a variety of finishing effects on denim can be achieved saving a lot of water and energy.

Jeanologia. © Innovation in Textiles

The Spanish company Jeanologia exhibited the first complete production line that includes all its technologies and disruptive solutions. The process starts withG2Dynamic, which allows treatment of the fabric without using water and chemicals. It goes on to theLaundry 5.Zerogarment finishing plant that guarantees zero pollution and obtains 85% saving in water. Laundry 5.Zero combines the following technologies: laser, G2 ozone, e-flow, Smart Boxes and H2Zero, the company’s first water recycling system; eliminating potassium permanganate, pumice stone, substances of concern and discharge from the textile finishing industry, as well as the manual processes of scraping and grinding.

Karl Mayer. © Innovation in Textiles

Karl Mayer, a German textile machinery manufacturer, remains on a growth path with its Denim Excellence Center at Karl Mayer Rotal. At ITMA 2019, Karl Mayer launchedGreendye．The nitrogen technology ensures less environmental impact and more efficiency during indigo dyeing. With its high concentration in the dye bath and under nitrogen atmosphere, the dye diffuses and migrates more intensely into the fibre than in case of conventional procedures. The chemical consumption can be reduced considerably, a minus of 50% is possible when using hydrosulphite and caustic soda, and there is also less yarn waste. Karl Mayer took over the patents for the innovative indigo dyeing technology from Master in 2018.

Quality control

Loepfe Brothers, a Swiss leader in yarn clearing technology, presented a brand-new yarn clearer – theYarnMaster Prisma．第一次,它结合了新的和建立hed sensor technologies in one device. Four sensor technologies interact intelligently to ensure fault visibility and data quality. As an extra benefit, Loepfe’s data management systemMillMaster TOP 2.0is an integral part of the new YarnMaster Prisma and complements every Loepfe yarn clearer installation.

Another Swiss company Uster Technologies launched fiveValue ModulesforUster Quality Expertquality management platform. The system connects, integrates, analyses and interprets vital quality information from every stage of the fibre-to-yarn process. The new modules are designed to give spinners an objective and accurate view of the entire spinning process, leading to higher yields and consistent quality.

James Heal, a British manufacturer, also launched anew collection的摘要ion testing instruments at this year’s ITMA.AquAbrasionis a class-leading hybrid Martindale, which allows users to perform controlled wet abrasion testing for the first time.TruRainis a water repellency tester, allowing users to test for this in a tightly controlled and repeatable way.ProDryprovides insight into evaporation. Finally,WickViewis a state-of-the-art instrument that uses an advanced imaging system to track and record the transfer of moisture through a garment.

Platform for collaboration

ITMA 2019 also provided the platform for the announcement of a comprehensive modernisation programme for Egypt’s textiles industry valued at around EUR 1 billion from exhibitors including Benninger, Brückner, EFI Reggiani, Itema, Karl Mayer,Rieter, Savio and Thies.

In addition, a number of ITMA and co-located events drew over 1,000 delegates. Among the events were the ITMA-EDANA Nonwovens Forum, Textile Colourant and Chemical Leaders Forum, Better Cotton Initiative Seminar, European Digital Textile Conference, Tex-Summit Global, Planet Textiles, SAC & ZDHC Manufacturer Forum and Texmeeting by TEXFOR.

ITMA also collaborated with supporting organisations, many of which sent visiting delegations from Central Asia, South Asia, Turkey and the Mediterranean countries. “We are extremely glad that many industry stakeholders see ITMA as an excellent platform for collaboration and sharing of ideas to make the industry more competitive in the face of digital transformation and to explore cutting-edge solutions to future proof their business,” said Charles Beauduin, Chairman of ITMA Services, which organises ITMA 2019.

The next ITMA will be held in Fiera Milano, Milan, from 8-14 June 2023.

www.itma.com

Further reading

ITMA 2019 sets new record with biggest number of exhibitors

Thank you for readingInnovation in Textiles,

Jana Bukolovska

Deputy Editor

Billy Hunter is away